Citation: | DUAN Wei, CAI Guo-jun, LIU Song-yu, ZHU Liu-wen, DU Yu. Evaluation method for sand liquefaction of Hong Kong-Zhuhai-Macao Bridge based on CPTU tests[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(z2): 236-239. DOI: 10.11779/CJGE2017S2057 |
[1] |
邹海峰, 刘松玉, 蔡国军, 等. 基于电阻率CPTU的饱和砂土液化势评价研究[J]. 岩土工程学报, 2013, 35(7): 1280-1288. (ZOU Hai-feng, LIU Song-yu, CAI Guo-jun,et al. Evaluation of liquefaction potential of saturated sands based on piezocome penetration tests on resistivity[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(7): 1280-1288. (in Chinese))
|
[2] |
SEED H B, IDRISS I M. Simplified procedure for evaluating soil liquefaction potential[J]. Journal of the Soil Mechanics and Foundations Division, ASCE, 1971, 97(9): 1249-1273.
|
[3] |
YOUD T L, IDRISS I M, ANDRUS R D, et al. Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127(10): 817-833.
|
[4] |
ROBERTSON P K, WRIDE C E. Evaluating cyclic liquefaction potential using cone penetration test[J]. Canadian Geotechnical Journal, 1998, 35(3): 442-459.
|
[5] |
OLSEN R. Liquefaction analysis using the cone penetrometer test (CPT)[C]// Eight World Conference on Earthquake Engineering, 1984.
|
[6] |
ROBERTSON P K, CAMPANELLA R G, WIGHTMAN A. SPT-CPT correlations[J]. ASCE J of Geotechnical Engineering, 1983, 109(11): 1449-59.
|
[7] |
JEFFERIES M G, DAVIES M P. Estimation of SPT N values from the CPT[M]. ASTM. 1993.
|
[8] |
BALDI G, BELLOTTI R, GHIONNA V N, et al. Modulus of sands from CPTs and DMTs[C]// Proc. 12th ICSMFE, 1989: 165-170.
|
[9] |
MAYNE P W, RIX G J. Correlations between shear wave velocity and cone tip resistance in natural clays[J]. Soils and Foundations, 1995, 35(2): 107-110.
|
[10] |
HEGAZY Y A, MAYNE P W. Statistical correlations between Vs and cone penetration data for different soil types[C]// Proceedings of the International Symposium on Cone Penetration Testing, CPT. 1995: 173-178.
|
[11] |
MAYNE P W. The Second James K. Mitchell Lecture: undisturbed sand strength from seismic cone tests[J]. Geomechanics & Geoengineering, 2006, 1(4): 239-257.
|
[12] |
ROBERTSON P K. Evaluation of flow liquefaction and liquefied strength using the cone penetration test[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 136(6): 842-853.
|
[13] |
GB50011—2010建筑抗震设计规范[S]. 2010. (GB50011—2010 Guidelines for seismic design of buildings[S]. 2010. (in Chinese))
|
[14] |
JTG/T B02—01—2008 公路桥梁抗震设计细则[S]. 2008. (JTG/T B02—01—2008 Guidelines for seismic design of highway bridges[S]. 2008. (in Chinese))
|
[15] |
廖先斌, 郭晓勇, 杜 宇. 英标和国标标贯设备试验结果相关性分析[J]. 岩土力学, 2013, 34(1):182-185. (LIAO Xian-bin, GUO Xiao-yong, DU Yu. Correlation analysis of standard penetration test results on British and Chinese standard equipments[J]. Rock and Soil Mechanics, 2013, 34(1): 182-185. (in Chinese))
|