• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
TANG Zhi-cheng, LIU Quan-sheng. Closure deformation model for rock joints considering asperity interaction[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(5): 853-859. DOI: 10.11779/CJGE201505011
Citation: TANG Zhi-cheng, LIU Quan-sheng. Closure deformation model for rock joints considering asperity interaction[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(5): 853-859. DOI: 10.11779/CJGE201505011

Closure deformation model for rock joints considering asperity interaction

More Information
  • Received Date: August 23, 2014
  • Published Date: May 19, 2015
  • The load-closure behavior of rough surfaces remains to be an open question of interest with applications in many practical rock engineering problems. According to the elastic theory, a theoretical model is further developed for obtaining the stress-closure behavior of rock joints. The present model can account for the deformed asperity interaction expressed by a uniform pressure. The composite topography is used to capture the features of rock joints under different contacts and the corresponding topography parameters are the input parameters for validity of the proposed model. The new model is also suitable for solving the closure behavior of rock joints with waviness component. Compared with those by the Xia model, which ignores the asperity interaction, the calculated curves by the proposed model fit the experimental results well.
  • [1]
    BANDIS S C, LUMSDEN A C, BARTON N. Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1983, 20(6): 249-268.
    [2]
    TANG Z C, LIU Q S, XIA C C, et al. Mechanical model for predicting closure behavior of rock joints under normal stress[J]. Rock Mechanics and Rock Engineering, 2014, 47(6): 1-12.
    [3]
    GOODMAN R E. Methods of geological engineering in discontinuous rocks[M]. New York: West, 1976.
    [4]
    BARTON N, BANDIS S C, BAKHTAR K. Strength, deformation and conductivity coupling of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1985, 22(3): 121-140.
    [5]
    MALAMA B, KULATILAKE P H S W. Models for normal fracture deformation under compressive loading[J]. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(6): 893-901.
    [6]
    SWAN G. Determination of stiffness and other joint properties from roughness measurements[J]. Rock Mechanics and Rock Engineering, 1983, 16(1): 19-38.
    [7]
    俞缙, 赵晓豹, 赵维炳, 等. 改进的岩石节理弹性非线性法向变形本构模型研究[J]. 岩土工程学报, 2008, 30(9): 1316-1321. (YU Jin, ZHAO Xiao-bao, ZHAO Wei-bing, et al. Improved nonlinear elastic constitutive model for nornal deformation of rock fractares[J]. Chinese Journal of Geotechnial Engineering, 2008, 30(9): 1316-1321. (in Chinese))
    [8]
    唐志成. 考虑扰动影响的节理与柱状节理岩体的力学性质[D]. 上海: 同济大学, 2013. (TANG Z C. Mechanical behaviors of rock joint under different contact state and columnar jointed rock mass[D]. Shanghai: Tongji University, 2013. (in Chinese))
    [9]
    COOK N G W. Natural joints in rock: Mechanical, hydraulic and seismic behaviour and properties under normal stress[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1992, 29(3): 198-223.
    [10]
    HOPKINS D L. The implications of joint deformation in analyzing the properties and behavior of fractured rock masses, underground excavations, and faults[J]. International Journal of Rock Mechanics and Mining Sciences, 2000, 37(1/2): 175-202.
    [11]
    LEE S D, HARRISON J P. Empirical parameters for non-linear fracture stiffness from numerical experiments of fracture closure[J]. International Journal of Rock Mechanics and Mining Sciences, 2001, 38(5): 721-727.
    [12]
    MARACHE A, RISS J, GENTIER S. Experimental and modelled mechanical behaviour of a rock fracture under normal stress[J]. Rock Mechanics and Rock Engineering, 2008, 41(6): 869-892.
    [13]
    GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1966, 295: 300-319.
    [14]
    GREENWOOD J A, TRIPP J H. The contact of two nominally flat rough surfaces[J]. Proceedings of the Institution of Mechanical Engineers, 1970, 185(1): 625-633.
    [15]
    YAMADA K, TAKEDA N, KAGAMI J, et al. Mechanisms of elastic contact and friction between rough surfaces[J]. Wear, 1978, 48(1): 15-34.
    [16]
    BROWN S R, SCHOLZ C H. Closure of random elastic surfaces in contact[J]. Journal of Geophysical Research: Solid Earth, 1985, 90(B7): 5531-5545.
    [17]
    BROWN S R, SCHOLZ C H. closure of rock joints[J]. Journal of Geophysical Research (Solid Earth), 1986, 91(B5): 4939-4948.
    [18]
    MATSUKI K, WANG E Q, SAKAGUCHI K, et al. Time-dependent closure of a fracture with rough surfaces under constant normal stress[J]. International Journal of Rock Mechanics and Mining Sciences, 2001, 38(5): 607-619.
    [19]
    唐志成, 夏才初, 宋英龙, 等. 考虑基体变形的节理闭合变形理论模型[J]. 岩石力学与工程学报, 2012, 31(增刊1): 3068-3074. (TANG Zhi-cheng, XIA Cai-chu, SONG Ying-long, et al. Joint closure deformation model based on asperity-substrate deformation[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(S1): 3068-3074. (in Chinese))
    [20]
    ISRM. Suggested methods for the quantitative description of discontinuities in rock masses[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1978, 15(6): 319-368.
    [21]
    XIA C C, YUE Z Q, THAM L G, et al. Quantifying topography and closure deformation of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(2): 197-220.
    [22]
    TIMOSHENKO S, GOODIER J N. Theory of elasticity[M]. New York: McGraw-Hill, 1970.

Catalog

    Article views (356) PDF downloads (380) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return