• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
胡瑾, 王保田, 张文慧, 郭帅杰, 张磊. 无荷和有荷条件下膨胀土变形规律研究[J]. 岩土工程学报, 2011, 33(zk1): 335-338.
引用本文: 胡瑾, 王保田, 张文慧, 郭帅杰, 张磊. 无荷和有荷条件下膨胀土变形规律研究[J]. 岩土工程学报, 2011, 33(zk1): 335-338.
HU Jin, WANG Bao-tian, ZHANG Wen-hui, GUO Shuai-jie, ZHANG Lei. Deformation trends of expansive soils under free and loading condition[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(zk1): 335-338.
Citation: HU Jin, WANG Bao-tian, ZHANG Wen-hui, GUO Shuai-jie, ZHANG Lei. Deformation trends of expansive soils under free and loading condition[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(zk1): 335-338.

无荷和有荷条件下膨胀土变形规律研究

Deformation trends of expansive soils under free and loading condition

  • 摘要: 通过室内无荷载膨胀率和有荷载膨胀率试验,对 芜申航道胥河段 原状膨胀土的膨胀速率和膨胀率 进行了研究。 根据竖向荷载的大小,将膨胀土单向浸水膨胀过程分为无荷作用、小荷载作用、大荷载作用 3 类,又对每一类浸水膨胀过程分别进行了分段。 研究了在不同荷载作用下,膨胀率、膨胀后干密度、膨胀后孔隙比和膨胀后含水率的变化规律。 结果表明:随着荷载的增大,有荷膨胀率减小,土样浸水膨胀稳定后干密度增大,膨胀稳定后,孔隙比、含水率减小 。最终竖向膨胀率与吸水率 呈正的半对数关系 。根据工程中允许土体产生的变形,确定允许膨胀稳定后的膨胀力,从而进行挡土墙的设计。

     

    Abstract: The e xpanding velocity and expansion ratio of the original expansive soils are studied by means of the indoor free expansion ratio tests and linear swelling ratio tests. According to the vertical load, the expansion processes of the expansive soils in one-way immersion under different vertical load s are divided into three types, namely no load acting, small load acting and big load acting, and are separately divided into different parts. The trends of expansion ratio, dry density post expansion, void ratio post expansion, moisture content post expansion under different loads are investigated. It is shown that along with the increase of loads the expansion ratio under loads, void ratio post expansion and moisture content post expansion decrease, and the dry density post expansion increases. The ultimate vertical expansion ratio has a positive semi-logarithmic linear correlation with the water absorption rate . According to the allowable deformation of the soils of the project, the allowable expansibility is determined. Then the retaining wall is designed.

     

/

返回文章
返回