• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
郤保平, 赵阳升, 张昌锁, 康志勤. 高温高压下花岗岩中钻孔变形规律实验研究[J]. 岩土工程学报, 2010, 32(2).
引用本文: 郤保平, 赵阳升, 张昌锁, 康志勤. 高温高压下花岗岩中钻孔变形规律实验研究[J]. 岩土工程学报, 2010, 32(2).
Drilling deformation in granite under high temperatures and stresses[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(2).
Citation: Drilling deformation in granite under high temperatures and stresses[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(2).

高温高压下花岗岩中钻孔变形规律实验研究

Drilling deformation in granite under high temperatures and stresses

  • 摘要: 首次运用光学原理钻孔变形观测仪对600℃以内,6000 m埋深静水应力以内花岗岩中钻孔变形规律及其稳定性条件进行了深入细致的实验研究。研究发现:①高温高压下花岗岩中钻孔变形根据温度和埋深应力不同,可分为黏弹性变形、黏弹–塑性变形及破坏3个阶段;②恒温恒压下花岗岩中钻孔变形具有明显的时效特性,随着时间的延长,钻孔孔壁位移逐渐增大,孔径缩小,钻孔蠕变变形量达到一定量后趋于稳定,钻孔并不发生破坏;③温度和加载应力对钻孔变形具有很大影响,保持岩体加载应力不变,逐渐升高温度,钻孔变形逐渐增大,直径缩小,温度保持不变,加载应力越大,钻孔孔壁变形量越大,钻孔内径就越小。

     

    Abstract: For the first time using an optical observation instrument of borehole deformation based on the theory of optics, the intensive studies on deformation laws and stability conditions of borehole within 600℃ and under triaxial hydrostatic stresses at a depth of 6000 m are carried out. The research shows: (1) Under high temperatures and stresses, drilling deformation in granite is different according to the temperatures and stresses at different depths, and it may divide into 3 stages: viscoelastic stage, viscoelastic-plastic stage and destroying stage. (2) Under constant temperatures and stresses, drilling deformation in the granite has obvious time effect. With the time, the wall displacement of borehole gradually increases, the aperture decreases, after the drilling deformation achieves the ration and tends to be stable, the borehole does not have the destruction. (3) Temperatures and loading stresses have very tremendous influence on the drilling deformation. If the loading stresses on the rock mass are kept invariable and the temperature increases, the drilling deformation would gradually increases and the diameter would decrease; if the temperature is kept invariable, the larger the loading stress level, the larger the wall deformation of drilling and the smaller the inner diameter of drilling.

     

/

返回文章
返回